Well that had to be one of the top 5 worst weekends ever. for those that know all ready, Mom is doing fine now and she's moving forward with cardiologists to determine what needs to be done, if anything. For those that don't, Mom had a medical emergency on Thursday and is now doing fine, but wont be in the store much the next few weeks. Until then, y'all are stuck with Debi and I! :-)
Now, on to cheerier things...it's Tippy Tuesday!
* We all know what a hassle bias binding can be, so whenever you've got enough extra that you could use for another quilt, wrap it gently around a toilet paper tube. Be careful not to stretch it. But that way, it's flat so no need to iron it, gently wrapped so it won't get stretched badly or caught on anything, and it's easy to find and to store.
* If you need a little bit of stabilizer, but don't have any on hand....head to the laundry room and use a USED dryer sheet instead! The fabric softener has all ready dried away, so the sheet is thinner, easier to take out and won't leave any residue on your fabric.
* Personally, I'm not a pre-washer of my fabric simply because I prefer the look of the quilt after it gets quilted, then washed and dried, but this is a great tip anyway and has saved my bacon more than once. Shout Color Catchers are AWESOME. When you wash your fabric/quilt for the first time, dye may come out of your fabric especially if the fabric is a lower quality (think Wal-Mart, JoAnn's), and that dye run-off is just about guaranteed to ruin your fabric and anything else you wash with it. toss in a Color Catcher or two and voila! The dye has run off, but nothing gets stained.
* Orphan/extra blocks make for cute pillows! Add fabric to attain the desired size, choose a back and there you have it!
* Just like with medical sharps, thought for different reasons, used needles, rotary blades and pins can be dangerous to just throw away on their own. For pins and needles, use an old, empty medicine bottle. punch a hole in the lid large enough to fit the pin heads through, and super glue the lid to the bottle. Pins and needles aren't too likely to spill out if dropped, and curious kids won't be able to open the bottle. As for rotary blades, keep an old rotary blade case and mark an "X" or "OLD" on it in permanent marker. That way, the old blades are still contained, and you know that case is not full of new blades.
* Save leftover batting that is at least 9.5" x 9.5" because it can still be used for potholders! You will still want the thermal material in there too, so you don't burn yourself while using them, but that batting helps insulate further.
Showing posts with label Pins. Show all posts
Showing posts with label Pins. Show all posts
Tuesday, August 30, 2011
Tuesday, August 23, 2011
It's "Tippy Tuesday!"
So I've decided that this blog filled with only my projects can get boring and monotonous (I'm sure some of you out there will scream if you have to see one more BooVille photo!) so I'm going to start doing a few episodic (weekly) posts and hopefully it'll jazz this up some and stay around! So...let's start with some tips to make your quilting life easier with Tippy Tuesday!
*Not all of us are lucky enough to have the space for a pre-fab Design Wall. If you have limited space, a large piece of white cotton batting/white flannel is a great substitute! Hang it up or drape it where you need it while you're sewing, then fold it up (even with your blocks still on it, they'll stay put!) and put it away when you're done.
*I'm a bad quilt girl and I don't pin my binding while I'm hand stitching it on. If you too hate pinning, a great alternative is to your the snap hair clips (you know, the ones you bend and they snap open) instead. They keep your binding in place and you don't have to watch where you stitch (or sit!)
*If you're looking for use applique ideas but don't want to draw them out yourself, check out your local scrapbooking or craft store. They have lots of stencils, punches and die cuts that might be just the design you're looking for.
*Do you like the idea of saving scraps, but then don't know what to do with them after the fact? Try cutting them into manageable sizes that you know you'll use down the road. For example, if you have enough cut some 2" strips, 2"-3"-4" blocks, half square triangles, whatever you think you'd use. whatever's left you can keep in a box for future applique projects - as we all know those applique projects can demand some tiny pieces, and a scrap earmarked for that may be just the thing you need.
*If a piece of fabric is the right color but a few shades too dark, there's nothing wrong with using the "wrong" side! If you have a good quality fabric, the print will still be visible, bit it'll be a paler version of the "right" side of your piece. No one will know the difference unless you tell them!
*"To help determine the value of a color (light, medium or dark) look at the fabric through a clear piece of red glass or plastic. The red neutralizes the color allowing you to see only 'black and white'" This is a good one! I don't know where to find a plain piece of red plastic, but my best guess is that an art supply store is a great place to start looking.
*Quilters are extremely skilled at dropping pins on the floor and forgetting about them, especially if it' s a carpetted floor. At the hardware store you can find telescoping magnets, and they are fantastic for pullin gpins off the floor/carpet without you having to spend a while bent over picking them out by hand.
*If you're travelling and can't have little embroidery scissors with you (yeah, I'm looking at you, TSA), wind a bobbin with the thread you are working with and put it inside a dental floss container (they're very simple to take apart and the center spindle is the right size for MOST bobbins). The cutter in the floss container is sharp enough to cut through most threads without fraying them.
*If you're having difficulty threading your needle try one of these methods if a needle threader isn't available: If you're having trouble seeing the eye, thread it with a white piece of paper behind it - that makes the eye much more visible. If the eye of your needle is large enough, you can use a thin piece of paper folded in half the same as a traditional needle threader. If your issue is the thread catching on the needle and not making it through, cut the tip of your thread to a beveled edge and try that - that will get rid of any little fibers that might be snagging. Also, every needle nowadays is stamped out of a larger piece of steel when it's made, so every needle has a front and back side; usually the front is easier to thread than the back, so just flip your needle over and try threading it again.
*Napkin holders are a great way to store the rulers that you use the most by your cutting mat, if you don't want to poke holes in your walls to hang each one
Well, that's it for this week's Tippy Tuesday. check back next week for more, or if you have any tips you'd like to share (hint hint hint) comment on this post and I'll post them for everyone next week!
*Not all of us are lucky enough to have the space for a pre-fab Design Wall. If you have limited space, a large piece of white cotton batting/white flannel is a great substitute! Hang it up or drape it where you need it while you're sewing, then fold it up (even with your blocks still on it, they'll stay put!) and put it away when you're done.
*I'm a bad quilt girl and I don't pin my binding while I'm hand stitching it on. If you too hate pinning, a great alternative is to your the snap hair clips (you know, the ones you bend and they snap open) instead. They keep your binding in place and you don't have to watch where you stitch (or sit!)
*If you're looking for use applique ideas but don't want to draw them out yourself, check out your local scrapbooking or craft store. They have lots of stencils, punches and die cuts that might be just the design you're looking for.
*Do you like the idea of saving scraps, but then don't know what to do with them after the fact? Try cutting them into manageable sizes that you know you'll use down the road. For example, if you have enough cut some 2" strips, 2"-3"-4" blocks, half square triangles, whatever you think you'd use. whatever's left you can keep in a box for future applique projects - as we all know those applique projects can demand some tiny pieces, and a scrap earmarked for that may be just the thing you need.
*If a piece of fabric is the right color but a few shades too dark, there's nothing wrong with using the "wrong" side! If you have a good quality fabric, the print will still be visible, bit it'll be a paler version of the "right" side of your piece. No one will know the difference unless you tell them!
*"To help determine the value of a color (light, medium or dark) look at the fabric through a clear piece of red glass or plastic. The red neutralizes the color allowing you to see only 'black and white'" This is a good one! I don't know where to find a plain piece of red plastic, but my best guess is that an art supply store is a great place to start looking.
*Quilters are extremely skilled at dropping pins on the floor and forgetting about them, especially if it' s a carpetted floor. At the hardware store you can find telescoping magnets, and they are fantastic for pullin gpins off the floor/carpet without you having to spend a while bent over picking them out by hand.
*If you're travelling and can't have little embroidery scissors with you (yeah, I'm looking at you, TSA), wind a bobbin with the thread you are working with and put it inside a dental floss container (they're very simple to take apart and the center spindle is the right size for MOST bobbins). The cutter in the floss container is sharp enough to cut through most threads without fraying them.
*If you're having difficulty threading your needle try one of these methods if a needle threader isn't available: If you're having trouble seeing the eye, thread it with a white piece of paper behind it - that makes the eye much more visible. If the eye of your needle is large enough, you can use a thin piece of paper folded in half the same as a traditional needle threader. If your issue is the thread catching on the needle and not making it through, cut the tip of your thread to a beveled edge and try that - that will get rid of any little fibers that might be snagging. Also, every needle nowadays is stamped out of a larger piece of steel when it's made, so every needle has a front and back side; usually the front is easier to thread than the back, so just flip your needle over and try threading it again.
*Napkin holders are a great way to store the rulers that you use the most by your cutting mat, if you don't want to poke holes in your walls to hang each one
Well, that's it for this week's Tippy Tuesday. check back next week for more, or if you have any tips you'd like to share (hint hint hint) comment on this post and I'll post them for everyone next week!
Subscribe to:
Posts (Atom)