Showing posts with label Techniques. Show all posts
Showing posts with label Techniques. Show all posts

Tuesday, November 15, 2011

Product Review: Heat n' Bond Feather Weight





If you do fusible applique, then at the very least you have heard of the brand Heat n' Bond, if not used it yourself. There are a few good fusibles out there on the market, and I have found through trial and error that Heat n' Bond products work the best for me. Not that the others, like Steam-A-Seam or MistyFuse, don't work well; they do, but I like the results I get with Heat n' Bond better.

Anyway, so Heat n' Bond has developed and released their response to MistyFuse and the other very light fusibles, which is their Feather Weight brand. We got it in at the shop for Carol and I, since we do a lot of applique, to test and see what we thought. Our opinions differ. I like Feather Weight, and actually I prefer it to Heat n' Bond Lite (my previous staple). I concede, however, that Feather Weight has some...idiosyncrasies. But once you know how to deal with and counteract those quirks, it's a wonderful, wonderful thing to have on hand.

Feather Weight really is just that...it is light as a feather! I have a tendency to go for patterns and designs that pile layer upon layer, and so the thinner the fusible, the better. But like I said, there are some idiosyncrasies. When the fusible comes off the roll, Heat n' Bond has affixed the plastic instruction sheet to the inside (fusible) side of the roll. The adhesive is so thin that trying to pull that instruction sheet off without tearing a wide swath from the middle is both an exercise in patience and dexterity. I have found it difficult not to lose an inch or two from the end that I peel the sheet off of, but I have also found that once you get it started and it stops tearing, it can be ripped right off like usual. Also, if you pull the sheet off just a few inches past where you're planning to cut your piece off, the fusible won't tear when you go for another piece and have to tear the instructions off again.

Speaking of instructions, this is the one fusible where I do in fact follow them. You absolutely cannot use a higher iron setting on this stuff, because the fusible is so thin it'll just dissolve away if you do. It on;y takes a second or two to adhere it to your fabric, but once it's on there, it's fabulous. Because of its thinness, it's able to be repositioned on your applique. The drawback on that thinness though is that repeated ironing, when you assemble your applique, makes the fusible dissovle a little more each time so you may find your corners coming up as you stitch everything down if you're working on a more intricate project.

So with Heat n' Bond Featherweight, its assets are also its liabilities. I have found, however, that it is more beneficial than not and it's definitely a product worth giving a try.

I give Heat n' Bond Feather Weight...

Thursday, October 20, 2011

Thursday, it's Technical: Troubleshooting your Misbehaving Sewing Machine

More often than I'm willing to admit, I find myself being too hard on my little machine, cussing at it whenever it doesn't do what I want. Let's face it, to a certain degree, every quilter has had that moment of rage when their machine is messing up and they can't figure out why! Lots of times people are very quick to just take it in to be fixed instead of doing a little troubleshooting on their own, which may fix the problem. It's intimidating, especially if you're unfamiliar with your machine, to open it up and figure out what's up. Even those manuals can be a bit vague when you're frustrated and trying to figure out the random "who-the-heck-knows" fit your machine has decided to throw.

General Trouble Shooting
Here are few general steps to go through before doing anything more intricate or taking your machine to a pro.
Rethread. Yes, sometimes it's as simple as rethreading your machine and that's it. Your thread may have slipped out of the tension disks, broke, got caught somewhere or something like that, that you wouldn't necessarily see right away. Rethread your top thread and your bobbin thread. Speaking of bobbins...

Rewind Your Bobbin. Sometimes, if a bobbin isn't wound properly, it causes weird little issues. Be sure to wind your bobbin as per your machine manual's instructions; some wind clockwise, and some counterclockwise, so be sure to be attentive to that. Also, use one continuous piece of thread to wind your bobbin, not several pieces of varying color and length. It seems like a great way to save and use "waste" thread, but in therms of your machine's function, it causes more problems than it solves. Use one piece wound off of one thread spool. And while you're down in the bobbin area...

Clean Your Bobbin Case Area. Your machine probably came with a little, stiff bristled brush for this, but I have found that canned air (yes, canned air like for keyboards) works the best. If you don't have canned air, try a soft paintbrush or makeup brush - their bristles are soft and flexible and get in the crannies better than the stiff plastic bristles of the standard issue machine brush. Dust and lint can really foul things up if a lot has accumulated, and every now and then a wayward thread gets caught in the bobbin case. Brush or blow out that bobbin case area. Carefully remove the throat plate if needed (you know, the metal piece surrounding the feed dogs) with the screwdriver included with yur machine, and clean down around the feed dogs too.

Change Your Needle. It could be that your needle is bent, dull or barbed and snagging on your fabric or thread. It's amazing how much a little needle can mess so much up! Or, you may not be using the right needle for the job; CLICK HERE to learn about the types of machine needles and which works best for the task at hand.

Problem Specific Troubleshooting
Here are a few common problems and how they can be fixed (in most cases)

Help! My bobbin won't go back in! It sounds silly, but is your needle down, or up? If it is down, no amount of trying to shove that thing in there is going to get it in because the needle is blocking where the bobbin goes. Using the handwheel, gently raise your needle and then try again. If that doesn't work, have a look inside. If you have just cleaned your machine, odds are something didn't get put back in properly. Look for loose pieces and put them in again. Your bobbin case should go in just fine.

Help! My bobbin thread is coming through my top thread! It's a tension issue (ha, I know, you can say that again). Your needle tension is too high, high enough that it is pulloing the bobbin thread too hard and that's why it's peeking up through your top thread. Take that puppy down a noth, I mean, half a number at once. If your tension is at 3 when this occurs, drop it to 2.5 and try again.

Help! My top thread is poking through my bobbin thread! Another tension issue (hiii-yo!). Your needle tension is too loose. Tighten it by half a measure. If your tension is at 3 when this occurs, to up to 3.5 and see what happens.

Help! My fabric is puckering when I straight stitch, and I don't want it to! Yep, another tension issue. Look, tension's a bitch, it just is and it get knocked off pretty easy. In this case, both needle and bobbin tensions are too tight. Loosen your needle tension by .5 a measure. Get to your bobbin and take out the bobbin case. See that screw on the side? It needs to be loosened, but only a little!  A little goes a long way with that thing, so try only a quarter turn at a time. Put your bobbin back in and try again. Adjust as needed until it works.

Help! There is smoke coming out of my machine, what did I do?! Well my dear, you might have just burned out your motor. There is nothing you can do to fix this on your own - take it to a pro. They might be able to fix it, but like damage to car consider whether the cost of the repair is greater than the worth of the machine. That might have been that machine's death throes and it might be time for a new one.

Help! My machine is skipping stitches! Unless you haven't had your machine cleaned in ages, this is a needle problem. Use the right needle for the job and change to a new one. It might be bent or barbed.

Help! My bobbin thread is a tangled, loopy nightmare when I sew! First, rethread your bobbin and top thread with the presser foot UP. If it's down, you're in tension mode and that can make the thread sit funny. try sewing again. If that doesn't work, change your needle. If that doesn't work, test with a different bobbin. It could be that your bobbin isn't wound well. If it's not, rewind another bobbin and get to work!

Help! My top thread keeps breaking! Make sure you are using a quality thread. Lower quality threads break much easier. If you're using a metallic, change to a metallic needle and take it slower - metallic threads break much easier than cottons or polyesters. To learn more about thread types and when to use them, CLICK HERE. More than likely it's a needle issue or a threading issue. rethread your machine first and try again. Usually that fixes the problem. If not, change your needle.

Machine Problem Prevention
- Keep your machine clean; get the dust and lint out of there after every project, or midway during a project if you are using fabrics prone to linting.

- Don't stitch using the handwheel. That knocks your machine out of tension and can mess up the timing.

- Unplug your machine and keep it away from little fingers. Children may play with it when you're not around, and when you go to use it everything is off. Most kids know that your sewing machine isn't a toy for them, but all those buttons and knobs and that pedal are awful enticing for little ones.

- Take your machine in for regular cleanings and maitenence by a professional. It's work the money to keep your machine in top shape!

- Be careful not to drop your machine, and if it is on the ground, take care not to knock it or kick it.


As always, DON'T FORCEyour machine if it's stuck and always be gentle when troubleshooting. These tips are handy for sure, but if you're ever in doubt, TAKE YOUR MACHINE TO A PRO. It's always worth it.

Sources and Additional Information
What the Craft
Sewing at About.com

Thursday, October 13, 2011

Thursday, It's Technical: Quilt Backing Basics

Let's take a step back and take a good hard look at the matter and be completely honest with ourselves: Figuring and buying backing fabrics sucks. It does. There is a lot to consider for such a simple concept and it is unavoidable because quilts must have backing. So whether you're just beginning or you're just looking for a little refresher, here is how to make figuring and buying backing a little less blah.

Calculating your Backing Needs
1. Measure
Your width is labeled as Y, your length as Z.

Y1 and Y2 should measure roughly the same, give or take .5", and same for Z1 and Z2. Yes, it is important to measure both sides, because sometimes our quilts just don't come out square.

If the sides are not the same as one another, take the average by adding the two together and dividing by 2. Ex.) Y1 + Y2 = ___. ____/2 = Width measurement. Use same method for length.

For the sake of example, let's say this quilt measures 55" x 70"

2. Add for the Quilter
IF you are taking your quilt out to be quilted by a professional longarmer, you need to add a few extra inches all the way around so the quilt can attach to their machine. If you are not, skip this step if you want, though, it is helpful even if you are quilting the quilt yourself, to have a little extra around the edges.

The grey area with the dotted line represents your backing fabric. Note how it is extending past the edges of the quilt.

Determine how much extra fabric you need around the quilt. Most quilters ask for 4" extra all the way around, but be sure to ask.

Double the amount needed around the edges to account for the extra on both sides, and add to the width and length. Let's say the example quilt needs 4" extra. 4 x 2 = 8. 55 + 8 = 63 and 70 + 8 = 78.

With the amount needed for quilting added in, the quilt's new size is 63" x 78"

3. Do the Math
Do the math for both types of backing fabric - regular width and wide width. When you go shopping for your backing it'll help you estimate cost and guide your decision. I'm only going to do an example for regular width (~45") fabric. Oh, and when I describe the width of the fabric, I'm describing the selvedge to selvedge measurement...I'm sure you knew that all ready but I thought I'd make that distinction :) Also, as fabric costs rise, the selvedge to selvedge measurement will begin to shrink. We're all ready seeing widths closer to ~40" than ~45". Be sure to check the width of your backing fabric (listed on the bolt) before calculating for the average. If you are unsure of where to find it, ask your local quilt shop for help.

Now, if your quilt measures less than 40" either wide or long, you only need to account for the remaining size measurement and buy the yardage, no further calculation needed. Let's say your quilt is 38" x 38". Well, 38" fits one width selvedge to selvedge, which averages ~45". So you only need to calculate yardage for the remaining 38", which is just oiver a yard. Your local store will probably only sell in particular yard increments, so a 1 1/8yds would fit the bill. But what if your quilt is larger than one selvedge to selvedge width?

The example quilt measures 63" x 78" and we are backing it with ~45" wide fabric. Well, neither the width nor the length fit in to ~45", so we know now that we will need 2 widths of the fabric to cover the back, like so:

OR

With ~45", you have ~90" total to work with, so choose the side that best fits the 90" with the least waste and that determines how your backing will be pieced. Generally horizonal piecing, like the second graphic, consumes less yardage because the longest side is accounted for with the selvedge to selvedge length and not the purchased yardage length, but as the quilt grows longer than 90" it ceases to be as cost effective. As I'll discuss later, the math works differently with wide backing. With wide backing you need to make sure that either the width or the length (either one) fits inside 108" and then calculate yardage for the remaining measurement.

But back to the math. Our quilt measures 63" x 78" and we have decided to piece the backing horizontally, like in the second picture above. Well, our length, 78" is accounted for in the ~90" we get out of pieceing the two 45" wide pieces. Done! Now all we need to do is determine our width yardage. So, our quilt is 63" wide and one yard is 36" long.
Divide the width by one yard: 63/36 = 1.75yd.
Remember, we need TWO equal pieces for this backing to cover the length of the quilt, so multiply your answer by 2: 1.75 x 2 = 3.5yd.

To back this quilt, we need 3.5 yards of standard width backing. If we choose to go with wide width, we need only 1.75 yards (enough for the width). How easy was that?

Choosing your Backing Fabric
Now that you have your backing requirements in your hot little hands, it's time to choose the fabric. I'm not going to get into color choice and pattern choice becausr that is so individually determined that I couldn't possibly begin to give any real pointers outside of what I do. Some people want their backing to match perfectly with the binding and with the front of the quilt, and others don't mind if it doesn't match 100%. Some people like to piece their backings so it's like a reversable quilt. That is all up to you, so I'll stick with the technicality.
This is the part that sucks, because yes...unless you are doing a baby quilt or smaller, it is spendy. You can choose bewteen regular width and wide backings like I mentioned before. Here are the pros and cons of each:

Regular Width Backing
Pros: A wide variety of color and pattern to match your quilt - high quality pieces available -  regular price and Clearance priced options widely available - cost effective for full sized quilts and smaller - cheaper per yard than wide width - with quilt shop quality fabrics, there is no need to test for colorfastness
Cons: Unless your heart is set on a piece this is not cost effective for large quilts as you may need more than two selvedge to selvedge widths to account for even the shortest side - can produce a lot of waste - if your quilt is large you will have a seam running down the back of your quilt - piecing your backing can be an inconvenience or cumbersome for some people to manage for reasons of space or physical ability - if you choose a directional print, more yardage is required than usual depending n the direction the print is running

Wide Width Backing
Pros: Less yardage is required because of the larger selvedge to selvedge measurement - most cost efficient option for large quilts - blender style color schemes complement quilts nicely - no need to piece backing
Cons: Are not available everywhere - limited range of colors, really basics only - lower quality greigh goods than regular width are used so they tend to be rougher - notably more expensive than regular width - if used on a non-queen/king quilt, there is a very significant amount of waste - colorfastness can be an issue with red pieces - seldom found on Clearance

You also may want a different fiber other than cotton, which is what I have been talking about. The math and measuring is all the same, but consider your function:
Summer quilts tend to do better with cotton backings, and winter quilts tend to be more suited towards flannel. Kids like soft things so flannel or minkee are great for those quilts, but maybe not so much for an heirloom quilt. As your quilter before using Minkee, because it stretches and sheds they may decline to quilt your quilt with that backing. If it needs to be durable and long lasting, first and second run fabrics like those found at Walmart and JoAnn's aren't your best bet.

Buying backing is the pits, so buy backings during sales. Even if you don't know what size you need, it's cheaper overall to shell out the discounted money to get several yards of a good general backing to have in your stash for a future project. The Cotton Patch has a Backing Sale on the 30th of every month (in-store only...apologies to non-local readers!) that is mentioned with rules in our newsletters so we try and help with that (because we hate buying backings too). Save scraps to piece a backing to reduce cost too!

Everyone has their own way of doing things, so you may find a figuring methodology that works for you better than this, but I hope that helped clear up some of the backing problems and make the math easier, for beginners and experienced quilters alike!

Thursday, October 6, 2011

Thursday, it's Technical: Choosing the Right Thread for the Job

Thread is one of those things that, unless we're choosing it for the top quilting, we don't think about much. We have "our thread" and we like what we like and that's what we use. Me? I tend to stay with Guterman 50wt. black in the top thread, and that, or Superior Bottom Line gray in the bobbin. I vary very little from that, but I'm starting to find that yeah, I really do need to change it up sometimes depending on what I'm doing. But honestly, I didn't know how I should be changing my threads and why, so I did a little bit of research about the different threads, when and why they're used. I hope you find this as helpful as I did!

Thread Basics 101
Thread Weights
Yes, just like wire, thread comes in "gauges," referred to as the thread's weight. The higher the number, the finer the thread. A good middle weight thread, and most commonly available is 50wt. and it will get the job done with most moderate thickness fabrics, like flannel, cotton, batik. 60wt. is more intended for bobbin thread, or sewing with lightweight fabrics like chiffon. A 40wt. thread is best served for things like cordouroy, canvas, and denim; its thickness will prevent it from breaking as it is pushed through the heavier fabrics.

Cotton
Cotton really is your go-to thread. It works well for most projects, is quite durable and comes in every color under the sun and is reasonably priced. Cotton thread is "Mercerized" meaning it has undergone a process to give it smoothness and a bit of luster and it accepts dye well. It is always wise to use thread to match your fabric, since with lower quality threads (as with fabric) the dye can bleed. It is good to use when you're sewing cottons, rayons or linens. Cotton has very little give to it, so if you're sewing knits or anything in which you need to retain stretch in the seams, cotton is not the right thread for the job.

Polyester
Polyester is widely available, and the subject of hot thread debate (who knew?). There are some who swear by polyester and who will use nothing but, and there are others who completely refuse to use the stuff. I suppose it comes down to personal preference, as with most things, but consider your purpose. Polyester doesn't shrink or fade, because it is a synthetic fiber, and as such it is intended for use with other synthetic fibers. It works well with knits, polyester, and cotton.

Rayon
It is lustrous and a great thread for decorative stitching. It is a synthetic fiber with little give, so it's not suited to anything with stretch (unless in the capacity of embellishment, not seams). It does have a tendency to slip out of machine needles and break, so it can be a little trying in the patience department, but the effect is worth it. It can be used in seams in a pinch, but it's not really the best choice for the piecing work.

Nylon/Monofilament
Nylon thread is meant for synthetics when used in a seam. It is mainly used for top quilting, as it is "invisible" and very forgiving as it embeds in the fabric well to hide stitching errors. While after completion it is very strong, it can snap when sewn in too fast. Some nylons are iron safe, and some are not - it depends greatly on quality and whether they are coated with another heat-safe substance or not. Use a Metallics needle for best results in a sewing machine.

Silk
Silk is perfect for hand applique. It hides well in the fabric and glides through the pieces like a dream. It is on the spendy side, though. It is best suited for "luxury" fabrics because of its cost and its natural sheen. It is also very strong, but you will also find a more limited array of color. It also works well for garments, because it can easily be hidden and it isn't bulky.

Wool
Wool thread is meant less for seams and more for embellsihment and hand applique. The common wool traits are applicable here - it is thicker, coarser and more expensive than your usualy cotton or polyester. You can use them in a machine, but you will need a larger eye for your needle and they fuzz like crazy, so clean out your bobbin case regularly.

Metallics
These are meant for embellishment and top quilting only. It snaps easily, making it a beast to work with, so this is not at all suitable for seamwork - besisde, you won't see that gorgeous shine in a seam anyway. These have a very striking effect on a quilt or garment, but can over power too. To cut down on snapping, use a Metallic needle in your machine for best results.

Considerations
As with all choices in material you can make, consider your purpose. Choose a thread that is best suited to what you're doing and how your item will be treated. Take into consideration the type of fabric you're sewing and its strength versus the strength of the thread - if they are too different in durability, the thread can wear through the fabric over time and create holes, or the wear on the fabric will snap the thread. Needle Pointers suggests that you choose a thread of the same matrial as your fabnric, and the same size as the weave of the fabric to ensure equality in strength. They also suggest, if equality isn't possible, to choose a thread weaker than the fabric - a broken thread is easier to repair than shredded fabric. Always test for colorfastness and be aware of how it will shrink in the wash versus your fabric. If it shrinks more, then it will create puckers which gives a quilt a more antique look. If it shrinks less, the puckers aren't created. Do you want your stitches to show or not? If you do, use a contrasting color or a thread with a different luster than your fabric; if not, choose the same color or luster as your fabric.

Remember, just like fabric, you get what you pay for. While 5 for $1 thread is a bargain for your wallet, it is  as cheap as it is inexpensive, and unless it is a major brand on markdown, it will tend to snap, stretch, shrink, fray, fade, and ravel more than the higher quality (and higher cost) threads which will in turn affect the quality of your work. There are many high quality threads out there, and you have to try several to find what you like and what your machine likes best. I prefer Guetermann or Presencia for my top thread, and Superior Bottom Line for my bobbin thread for piecing and applique (we have these at the shop). I'm really partial to Superior Monofilament and Sulky Holoshimmer for decorative quilting. You'll have to find your thread brand of choice for yourself and change up your fiber content for the project at hand.
Sources and More Information
All Free Crafts' article on Thread
Textiles in Depth
eHow
Needle Pointers - explore this one...there is A LOT of information.
Best Sewing Machines' Thread Tips

Thursday, September 29, 2011

Thursday, It's Technical: Elements & Principles of Art, and their Application in Quilting

A question that has now more than ever popped up in the quilting community and the greater art community is "Is quilting art, and should quilters consider themselves artists?" If you have been following this blog, then by now you know my position on this debate. If you don't, now you do: Let's face facts, quilting IS art and quilters ARE artists whether they identify themselves with that status or not. While relegated to the undermining title of "folk art" in the mainstream art community, quilting and the other fiber arts follow the same principles and contain the same elements as any sculpture or painting do. To illustrate this point, I will discuss the formally identified Elements and Principles of Art, and how they relate to and are used in quilting. From there, I encourage you to make your own decision concerning the position of quilting in the art world, and I invite you to discuss your ideas in the comments section below!

The Elements of Art
The Elements of Art (EoA) describe the concrete visual and physical attributes of an art piece. They are the building blocks of Art, the basic factors the artist manipulates to create the piece as well as define the Principles of Art, which I will discuss later. An art piece is judged in part based on the EoA. There are 7 EoA.

Space
Space is exactly what it sounds like - it is the area earmarked for a purpose. It includes foreground, middleground and background. In quilting it is mainly observed as the areas inbetween the focus components of a pattern or in the pattern of the fabric. This is where your eye comes to rest from the other colors and patterns. Positive space constitues the focus pieces, and negative spaces contain the "nothingness," the spaces aside from any focus component. Space is the most basic and essential EoA.


Left: The area around the Ram is the Space in the picture. Note the spaces around the horns and body and between the legs. Right: The white is the focus, and therefore the positive space. The black is the background and non-focus space, and therefore the negative space.

In quilting, space is used so many ways it is really too vague to describe here, so I offer you this instead:


It has space and shows Space! :D
Color
This is pretty self explanitory for any art form. In terms of the EoA, this describes every aspect of color - the color choice, it's placement, it's intensity (barring tint, shade and tone which fall under the EoA "Value").


Remember this guy?

In quilting, like space, color is used in so many ways that it's near impossible to concretely describe its use here. So I offer you this instead:


It's a Color Wheel. It's a quilt. It's a Color Wheel Quilt.
Value
Value and Color go hand in hand. Value describes the lightness or darkness of a color and how it interacts in a piece. This is where you find shades, tints and tones.


Value. It has it.

Value creates highlights and shadow, and in so doing creates visual depth in a quilt.


Through the use of value, this quilt has depth and it give the visual impression of 3 dimensions.
Line
Line is a continuous mark made by a single moving point, a connection between two points, which can follow any path between the two. Line is what provides the delineation between two spaces, either with an intentional line (like a coloring book outline) or an implied line (say, the line created between two differently colored spaces), and what gives shapes their definition.

This is a great example of the use of line and its many variations and applications

In quilts, line is created by the seams, by color placement, by pattern or by block arrangement.


 These blocks and applique give the impressioon of a continuous, convoluted line.

Shape
Shape defines the visual delineations of an object, and is determined by line or color. A shape is always two dimensional, and can either be geometric (with straight sides) or organic (with curved or irregular sides). To the eye, the outline of a basketball is a circle, the outline of a door is a rectangle, and the outline of a leaf is a variable, organic shape that is characterized only by that species of plant. Quilters use shape when deciding how they want their quilt to look - do they want their quilt square, rectangular, octagonal, square with rounded corners, circular, rectangular with scalloped edges? Shape dictates form.




An octagonal quilt

Form
This is the physical, three dimensional shape of the piece, or the effect of three dimensions on a two dimensional surface. Where to the eye a basketball is a circle, to the hand it is a sphere, the door is a box-like rectangle, and the leaf is a wafer thing, irregular edged sheet of plant matter.


From a shape on paper to the form of the hands.

Form determines size and function, and for a quilt, it is a very important thing to consider - does it need to be large enough to fit a Cal King bed, or is it just meant to hang on the wall? How much loft do you want to your batting? Are there any three dimentional additions to your quilt, changing it's form - buttons, ribbons, trepunto, folding? Do you want certain blocks to jump out that the observer, appearing three dimensional? A tumbling Block quilt is a great example of visual form.


This Tumbling Block quilt makes it look, through the use of value and form, like you could kick those stacked blocks over and they'd all fall down.

Texture
Texture is the either visual or physical feeling of a space, and obviously is very important in quilting. Texture can be implied visually through the use of line, color and value, like we see in lanscape fabrics in which they are made to look like woodgrain, sand or pebbles. It is also literal, giving the eye a visual texture and the hand a physical one.


The visual texture of fur here is incredible. It looks like you could touch the picture and feel that dog's fur.

This is most common when quilters mix fibers, like putting flannel and cotton, or velvet and silk together. They are viually AND physically different textures.


The use of various fibers in a quilt gives it both physical and visual texture.
Principles of Art
The Principles of Art (PoA) are the results of organizing the EoA into certain and intentional arrangements. This are also criteria by which an art piece is judged. There are nine PoA.

Balance
Balance is achieved base don the way the EoA are arranged in an art piece. By arranging Elements in a particular fashion, the artist can create feelings of heaviness or lightness, darkness or brightness.


This is somewhat asymmetrical balance.

In a quilt, this is what we consider when we want to adjust symmetry.

This quilt is balanced because of it's just about perfect symmetry.
Contrast
Contrast is the difference between two portions of a work that creates a pop, tension and interest. It helps a work to flow dynamically. With contrast, subtlety is definitely not the name of the game.


There is no higher contrast than geometric black and white.

For quilts, this is achieved mainly by color placement, value assignment and variation in block style and size compared to those it's paired with.

This quilt has high contrast color as well as block size.


Proportion 
Proportion mainly deals with the size of a component as compared to the sizes of the surrounding components. it goes hand in hand with Emphasis - larger items are emphasized more than something smaller by comparison. A good example of conscious use of proportion is with charactatures - they are drawn with a person's most identifying features (small eyes, a wide mouth, chubby cheeks, a prominent chin, a delicate nose, for example) being shown the most out of proportion with what one would expect from a portrait, either drawn comically small or absurdly large.

Leonardo diCaprio, your forehead is disproportionately large compared to your face.

With quilts, this mainly is achieved with altering the focus portions of a block - stretching them in one direction or another, making one block very large while others are small, etc. For quilts, this often gives a more whimsical or fantastical feel to a quilt.


The star blocks are out of the expected proportiuon, giving this quilt a more whimsical feel.

MovementThis is a piece's "flow," how the eye moves through the piece through a guided means using the EoA. More dynamic movement in a piece gives the viewer an impression of excitement, volatility and energy. Static movement gives a sense of seriousness, calm or quiet.


This wave looks like it could crash any second. You can almost hear the sound of it. The use of movement here is highly effective!

There are entire quilt techniques built around this concept. Bargello quilts give a sense of waving movement, like a flag. Watercolor quilts have a cascading movement. It can be achieved in so many ways that a quilter must carefully (whether she/he actively thinks it or not) consider fabric choice so as not to create vibrations of a busy print in an otherwise calm piece, for example.


 Here the movement is created through the quilting rather than the piecing.

Pattern/Rhythm
This PoA can also be called "rhythm" but most often you'll see it defined as Pattern. This is the repetition of EoA with the intention of creating consistent intervals of EoA, and this goes hand in hand with Movement. Pattern and Rhythm guides the eye as the artist chooses, and if used in a particular way, can give the
impression of Movement.


Pattern in the ceiling,rhythm in the repeated arches.

Pattern is prevalent in quilting, from the prints on a fabric and the placement of colors in a block, to the repetition of the blocks through a quilt.


There is distinct pattern in the blocks and in the fabric. "Yo dawg, I heard you like pattern..."
Emphasis
This is the focus of the piece, achieved by arranging the EoA and other PoA in such a way that this portion is the first thing you eye goes to upon looking at the work. This is the thing you want viewers to pay the most attention to.


One of these things is not like the other...emphasis!

In a quilt, this would be your focus fabric, your most dominant block or color.


Hey, guess where the emphasis is? Oh, and this is a good use of space, too.

Unity/Harmony
Quite simply, Unity and Harmony describe the visual completeness of a piece. If you look at something and have to ask "...is that finished? It feels like something's missing," then that piece lacks unity. Harmony comes in to play when unity is achieved using similar PoA and EoA, for exmaple using line, form, rhythm and movement to create the desired effect as opposed to focusing on color, value and emphasis.


Unity. It has it.

Quilters have to think about the whole piece, from the fabric type and color choice to blocks to accents to borders to attain untiy in their quilt, just as a painter must consider color as well as paint texture.


I think they got all their bases covered here, don't you?

Variety
Variety is exactly what it sounds like - it is the changes we see in an art piece that are different from one another. It can be achieved through use of color, emphasis, size, really any of the EoA or PoA.


Value. Depth. Contrast. Color. Emphasis. Yes, this painting has variety all right.

For quilters this means using different types of blocks, different size blocks, more than one color, different fabric types - the possibilities are endless. Having a lot of variety creates a lot of visual interest because the eye has more to process than pieces with less variety in them. That's not to say that little variety is a negative thing; many contemorpary quilts and minimalist pieces create their impact by having a single focus and little variety otherwise.


Where it lacks variety in block style, it achieves it through block size. This quilt is simple, yet it is very visually engaging

***

If you've made it this far and you're still with me, you can plainly see that all of the Elements and Principles of Art play a huge role in quilting. On the surface to many ears it seems a bold claim to declare that quilting is as legitmate an art form as sculpture and painting, but the truth of the matter is that every quilt a person makes, whether it is the result from conscious planning on the part of the quilter or not, is guided by and contains all of the Elements and Principles of Art. The next time you find yourself in a quilt shop or at a quilt show, consider these factors and you will see time and time again these criteria being met in countless different ways. On a deeper, more philosophical level, one must consider more than the observable checklist of criteria in determines what ought to be considered art and what shouldn't. So where does "folk art" fit in on that spectrum? It seems to ride the borderline between being art and being a craft, but where does that distinction lie, and why is there such a hugely different connotation between the two? That is up to you to decide for yourself.

In my opinion, I truely consider quilting an art as it meets the observable criteria, there is purpose and meaning behind it, it requires artistic thought, and it requires a skill set that isn't innate - while anyone can do it, it still must be learned and practiced. To me, quilting is relgated to the oft-sniffed at concept of Folk Art ("it's not real art, but it is art in a way") because its roots aren't found in wealth, prestige and lofty ideals the way the formal arts claim their roots in the great ancient civilizations with works made for royalty and religion. Quilting has its roots in the ground, among the dust and the dirt, with pioneers, working class, and the elite alike. The skills required for quilting have more practical origins than do other arts - sewing has been a necessity since humankind figured out that clothing is a real asset to possess - and as such the attitude of "well, it's just sewing, anyone can sew" has both helped and hindered quilting as an art. The formal art community may not see the artistic merit of quilting on those grounds alone, not to mention the fact that it is a functional piece of art and not merely a decorative art. Again, the lines are blurred and you can find many an article and argument for both sides of the Art community versus Quilting community, is it art, is it not arguement. This is simply my own opinion based on my observations and academic research work (quilting was my Anthropological thesis after all) - I encourage you to look out there and make your own decision as to whether quilting is, is not or is both.

I encourage and welcome your discussion about quilting as art in the comments section below. Please tell me what you think and let's have a debate of our own!

Sources and Additional Information
Elements and Principles of Art Slideshow
Good ol' Fashioned Wikipedia (taken with a grain of salt, of course)
International Quilt Study Center & Museum

Thursday, September 22, 2011

Thursday, It's Technical: Quilt Batting Basics

Batting (or padding/wadding as it is also known in other regions of the world) is one of those utilitarian items that just about all quilts have but seldom is any importance placed on it to - after all, it's just the "fluffy stuff" that makes your quilt poufy and warm, and no one sees it once the quilt is finished, so why pay it much mind? Okay, so you're half right. Batting is nowhere near as important as your fabric choice, or how you choose to quilt your quilt. But batting does dictate to a certain degree how your quilting turns out, and it determines the look your quilt will have three-dimensionally. Not all battings are created equal for your purpose! This time, I'm going to discuss from the group up what batting is exactly, what it's made of, the types and what kind of batting is (in general, there is always variation in opinion about it) better suited for which kind of project.

Batting Terms
Batting is the middle, fibrous layer of your quilt that no one sees. It can vary in fiber content and in weight, but it is what gives your quilt its warmth and thickness.
Batt is another word you'll hear tossed around, more often colloquially than not. It is just a synonym for batting.
Bonded Battings are held together by a glue-like material that has been fused to the fibers to keep everything together.
Needle Punched Battings are held together by the scrim, and are felted toegther using hundreds of tiny needles. There is no glue-like bonding agent.
Scrim is a very loosely woven netting used in needle punched battings. It can either be synthetic or natural in composition, and helps to keep the batting more stable and durable than a fusing agent alone.
Natural Batting is comprised of one or more natural fibers like cotton, wool, bamboo, or silk
Synthetic Batting is made from "unnatural" (meaning, not occuring in nature) fibers. Polyester and Poly-Blends are the most common in this category
Drape describes the feel and how your quilt will lay after it is finished. Your batting choice and how much quilting you decide to do determines whether your quilt has a stiff or soft drape. Thicker batting and more quilting equates a stiffer drape; thinner batting and less quilting constitues and softer drape.
Loft is how thick or poufy your batting is. High loft is thicker, low loft is thinner. Many battings come in various loft choices, but some only have one loft style.
Bearding is the batting fibers coming through the front and back of your quilt, and is definitely not a good thing. It occurs when a batting is poorly constructed and there isn't much you can do about it once it happens other than deal with it or rip our your quilting and replace the batting with something of a better quality.


Batting Types and Their Attributes
Cotton
Cotton is used most commonly out of the natural fibers. It is generally a low loft batting that is usually needle punched, but bonded can be found as well. White it is low loft, it is a pretty dense batting so at a low loft you'll stay warmer than you'd expect. It breathes well, meaning you'll stay warm but you won't overheat, and it does wick away moisture. That being said, cotton can mildew and retain smells if not taken care of properly. It shrinks on the initial wash, so after washing it will give quilts a more aged and used look (it wringles around the quilting stitch). As it is used though, it gets softer and softer, so it will drape very nicely over the bed and therefore over you. It can handle heavy quilting, so it is usually the batting of choice for show quilts, because it'll show off that wonderful, intricate quilting. With cotton, there is the option to find batting made with cotton free of pesticides and petroleum based fertilizers ("organic"). If the whole "organic" craze is important to you, then cotton is a good choice because you have that option. In terms of cost, it is middle of the road - not the spendiest but not the most inexpensive either.

Cotton-Poly
Cotton-Poly is a blend of Cotton and Polyester, so it isn't fully natural or synthetic and has the benefits of both; typically it is ~80% Cotton to ~20% Polyester.  It is a higher loft than cotton, but a lower loft than Polyester. It is less prone to shrinkage like Polyester, but it is more breathable like cotton. It too can handle quite a bit of quilting, but not as well as cotton does. It has the warmth of Polyester without the weight of cotton, and it drapes very nicely. Generally speaking, it is roughly the same cost as 100% cotton batting.

Polyester
Polyester is the most popular and widely available synthetic batting on the market. It generally is a high loft batt, but several different lofts are available. It quilts nicely, especially for hand quilting, but it can't handle heavy machine quilting like natural fibers can.  It's not a heavy batting, so that's a plus, but on the flip side of that coin, Polyester batts are subject to bearding because they aren't fused or needle punched as thoroughly. Unlike cotton, it is fully machine washable and dryer safe, won't retain mildewy smells and since it's synthetic it'll go back into shape after washing (no wrinkling around the quilting stitches). Polyester is definitely the way to go if you suffer from any kind of fiber allergies, because it is hypoallergenic by nature. However, it is a petroleum based material, so it isn't a renewable resource and it's not as environmentally friendly as other battings, if that is a concern of yours, then Polyester batting might not be for you. Of all the battings, Polyester is the least expensive option.

Wool
I have to say, wool is my batting of choice. It is generally a mid-loft, though thin wool batts are easily available. It natually regulates body temperature because it breathes and insulates at the same time, ensuring that you're not too hot or too cold. A neat thing about wool is that it can absorb 1/3 of its weight in water without feeling damp, so it'll still keep you warm even if it gets wet. Plus, wool quilts by both hand or machine very smoothly and really accentuates the stitches well. The downside to wool is that is not dryer safe because it can felt and get ruined by the heat of the dryer - air dry is the way to go. Moths also love wool batted quilts, just like they do wool sweaters, so it is important to keep an eye out for moth damage if you are storing the quilt. On the other hand, wool is naturally flame resistant so it is a good option for baby and children's quilts. However, if you're a fiber allergy sufferer, wool is not the fiber for you as it is the most common fiber that people are allergic to (it's the naturally occuring oil in the wool that is generally the culprit) and it has a tendency to beard if it's a lower quality wool batt. It is on the upper end of cost of the battings - less expensive than silk but more spendy than cotton or Polyester.

Alpaca
Alpaca batting is a type of wool batting. It is lightweight and very warm and breathable like wool, but it has a reduced allergy risk because it isn't oily the way sheep's wool is. It is usally blended with other natural fibers, and it is a needle-punched style batting. It does have the pitfall of felting and bunching in the dryer, and it is also susceptible to moth damage. It is the most expensive of the battings available simply because it is a specialty batting.

Bamboo
Bamboo is a truly wonderful, low loft batting. Bamboo is a fast growing plant, so it is a sustainable resource. It isn't as warm as wool, but it breathes like cotton and is perfect for summer quilts and throws. It is naturally hypoallergenic and antibacterial, so it's a good bet if you're an allergy sufferer. It doesn't beard because it a pretty flat, smooth batting. It is needle punched, so it doesn't have any bonding agents, but it makes it harder to hand quilt because it's fairly dense for being thinner. Bamboo tends to be on the expensive side of the spectrum, more comparable to wool, and it is more difficult to find than cotton is.

Silk
Silk batting is used less for quilts and more for quilted garments. It drapes the best out of all the battings, and it is incredibly warm for its thinness. It doesn't cling well to fabric, so machine quilting can be tricky as the fabric may slide over it.

Choosing the "Right" Batting for Your Quilt
The truth is there is no "right" choice, other than buying quality batting that won't clump or beard. Otherwise, it's all about the effect you want, the feel you want and what you enjoy working with. for myself, I stick with wool, cotton and bamboo....cotton and bamboo for tablerunners, wool for wall hangings and throws, and cotton for bedquilts. But here are a few guidelines to help you if you don't all ready have a batting in mind:

Hand Quilting - Wool, Polyester quilt the smoothest
Machine Quilting - Cotton, Wool, Alpaca, Cotton-Poly, Bamboo and Silk show off machine quilting well.

What size is your quilt? Low loft battings are perfect for tablerunners. Higherloft battings are great for wallhangings, because the thicker the batting, the straighter the piece will hang.

When will you use your quilt? Lower loft and breathable battings are best for summertime or warm climates - think cotton, bamboo, cotton-poly batts. Higher loft, less breathable battings are more suitable for cold weather quilts or cooler climates - think Polyester, wool or alpaca.

* Consider your budget and cost of batting. Plan to spend between $20-$40 on batting.

* Always follow the directions on your package of batting. It will let you know whether it can be used straight out of the package, how heavy or loose the quilting can be, the washing instructions and the fiber content.

Trial and error plays a big role in finding the right batting for you. I hope these tips and guidelines help you on your search!

Additional Information and Sources
Day Style Designs
Quilt University
Christine Mann's Batting Tips
As always, Google searches are great things!

Wednesday, September 21, 2011

Tippy Tuesday, only on Wednesday

Well, life has been crazy lately (and not in a fun "Barrel of Monkeys" way). Too much time has been spent in hospitals and at doctors appointments, and I've been triple-timing it at work so my time for anything more than work and sleep has been extremely limited. But we did finally get some good news - Mom doesn't have a heart problem. Her heart attack and related issues were not caused by a faulty ticker, but because of a thyroid disorder called Graves Disease. Don't worry, it's named after the doctor who discovered it in the 1920s, not after where you end up if you have it. Luckily it is easily treated and hopefully life will return back to normal for all of us soon. Needless to say, everyone in the family and at the shop are so very relieved it isn't anything more serious.

So, now to the tips. Since I haven't had a whole lot of time, I haven't gathered that many so I'm gathering while I'm writing. I haven't been able to test any of these out so they mayt or may not work for you but hey, it never hurts to give it a go on scrap or test fabrics/notions. Here we go!:

* Flannel works as a good batting subsitute if the quilt you're making is thick enough on its own (a Minkee quilt, for example) or if you want to keep your quilt really lightweight. Back in the day flannel was often used as "batting" because batting of a good quality wasn't always available where flannel was easier to obtain.

* Dishwasher utensil baskets make a great notion storage device - they are narrow and compact so they stay out of the way on your table, and they are easily hung up on the wall to be out of the way entirely. So if you're getting rid of a dishwasher, save that basket! Or, you can purchase one relatively inexpensively.

* If you're binding a quilt, and it's getting too warm to do while it's draped over you, move your ironing board to where you're seated and lower it to just above your lap. Drape the quilt over it and continue binding. The ironing board prevents the quilt from overheating you, and there is a nice draft between the quilt, board and you.

* While you're working on a project requiring several bobbins, stick a Q-Tip in the spool of thread, and then the bobbin through the Q-Tip. If you run out of thread, you will quickly know whch thread you used for that bobbin in case you forget.

* Keep inexpensive makeup brushes (eyeshadow and eyeliner brushes work best) as well as the fuzzy dental picks in your sewing kit. They are great for cleaning your machine when needed, and get into the nooks and crannies better than the brush your machine came with.

* If you have a cat or small dog, fabric scraps (apparently) make good chew toys. Tie a knot in it and let 'em at it. My chihuahuas can hardly wait until I start having scraps falling. I give them the big ones I know I won't use later, with the knot tied in it and believe it or not it gives them literally hours of entertainment gnawing on that thing. Sometimes they'll steal away the smaller ones and chew it to bits after it falls from my cutting board and I don't always catch it until it's been in their slobbery little mouths for a bit. They just shred them up, so it's not really a choking hazard, but it could be - stick with larger pieces.

* Clean your blades, both rotary and scissors, with rubbing alcohol to keep them gunk free and cutting smoothly.

* If you are thrying to thread a clear monofilament through a needle and not having much luck, there are two things you can do: first, thread it against a dark fabric since that makes the thread easier to see. or color the very tip of the thread with permanent marker so you can see it to thread it and then snip it off.

* Making cloth napkins and coasters are a great way to burn through your scraps/stash and they make nice gifts for people.

* Speaking of cloth napkins, if you have a theme decor in your dining room, buy cloth napkins that complement your color scheme or dishes and use them in a table runner. While the fabric quality may not be the same as quilting fabric, it's an inexpensive way to tie your room together. Plus, it's not a piece to be washed regularly so using the napkins is just fine. A heavier weight napkin tends to work a little better than the lightweight cotton ones.

* The edge of the selvedge tells you more than just the line and manufacturer. Those colored dots tell you how many different dye screens were used to make that whole fabric. As such, those are the individual colors that will match and blend nicely with that piece of fabric. So if you're stuck on the color choices with your go-withs, that selvedge is a great place to start looking!

Thursday, September 8, 2011

Thursday: It's Technical. Color Theory and Color Choice in Quilts

When I was an art student, and somehow the topic of conversation go to that point, I'd say 70% of the time the response was "Oh, I could never do that, I can't draw and I don't know anything about color." Now that I work in a quilt shop, people come in all the time asking for help with color choices, usually followed by "I just can't put colors together." Don't get me wrong, I love helping people with their color choices, I think it's the most fun part of the quilting process! But this post is about empowering people to love and not fear their color choices by showing how easy color can be!

Color Theory is a term we hear pop up a lot in the art world, and now it's found a place as a buzz phrase in the quilting community. It sounds like an unnecessary complication to a pretty straight forward concept - choosing colors you like and that look good together and putting them in a quilt - but knowing how color works and how colors interact in an art piece can prove to be a valuable asset in quilt making, making your already beautiful quilts that much stronger.

Since we're all starting from different experience levels, I'm going to explain Color Theory from the ground up; I'm not insulting anyone's intelligence, I promise, I'm just going to lay it all out so everyone starts on the same page.

Color Basics
 Even if you don't do traditional art or quilt, you still know something about color even if you don't readily recognize it. Think about it for a minute: what's your favorite color? Is there a color pairing you find yourself buying a lot of for your home or wardrobe? If you can dress yourself, then you can pick color. Most of us (People of Walmart not included) have a reasonably good idea of what colors look good on us (for me, jewel tones), what does nothing for us (for me, white and beige) and what looks downright God-awful (I'm looking at you, yellow). Women especially have a good idea of color because most of us at least ever now and then, wear makeup. We have to know if we have a warm or cool toned skin tone, if we're an "ivory, buff, beige, tan, olive, or ebony," which eyeshadow will make our blue/brown/green/hazel/grey eyes look more blue/brown/green/hazel/grey, and whether our lipstick will make our teeth look white or yellow based on whether the lipstick is yellow based or blue based. Guys, you know color too! You carefully select your tie to match your suit to match your hankercheif to match your shoes, your car's exterior to match the interior to match the speakers, your customizable video game and  RPG characters to look the most menacing ro the most sage (you can't have an anti-Paladin in pink...that's not menacing and manly at all).

But just to review the color basics we all ready know...
Warm Colors - Red, orange and yellow are traditionally called the warm colors. Browns, tans, even some purples and blacks can be considered warm colors if they're red or yellow based. But that's overcomplicating it, and we'll get to that later. Warm colors all share their primary base of red. We know the warm colors give a more bright, energetic, alarming, cheerful feel to whatever they are covering.

Cool Colors - Traditionally, these are green, blue and purple. Grey, brown, black and beige can also be cool colors if they are blue or green based. Cool colors all share the primary blue base. These are called cool colors since when they are used, they evoke feelings of calmness, coldness, crispness and freshness that warm colors contrast with.

POP QUIZ! True or False: Black is all colors combined and white is the absence of color, so therefore there is only one black and one white - they're all the same. Read on for the answer...


 
Remember this? I think we all had to make our own version of this in grade school using too much tempera paint and glitter.

Hues
The above Color Wheel is showing the hues only. A hue is the pure color, meaning it is not mixed with gray, black or white to achieve darker, lighter, duller or brighter colors. You've probably also noticed that brown, grey, black and white are NOT shown on the Color Wheel. All of that I will explain later, but first, let's just focus on the hues.

Primary - The primary colors are the three that make up the very center of the Color Wheel; Red, yellow and blue. These three colors are the very base of all other colors, which means they also are the least complex (yes, even white and black are more complex than your primary red, yellow and blue. I'll get to the different types of the primaries later). These 3 colors are not the result of mixing any other colors, meaning you can't mix X and Y and get red for example.

Secondary - The colors are the result of mixing any 2 of the 3 primary colors; red + yellow yields orange, yellow+ blue yields green and blue + red yields violet. Secondary colors are still fairly pure, meaning they are the result of your most basic primaries, not dark red + light blue or anything like that.

Tertiary - These colors are a little more complex. I refer to these as the Crayola colors; these are the Violet-Reds, Red-Violets, Yellow-Greens, Blue-Purples...all of the least creatively named, yet prettiest (in my opinion) crayons of the Crayola 24 pack.  These colors are achieved by mixing one primary color and one secondary color, so they end up being the "in-between" colors, not quite one or the other. This is one way to get your darks and brights of secondary colors.

How does knowing Hues help in quilting?
Knowing the hues helps a great deal. Think of the hue of the color as the foundation of your house. Your house needs a foundation to be built on, just like your quilt needs color to grow from. By knowing how a hue is built and where it sits on the Color Wheel, you can more easily choose the colors to go with it. Each hue has a built in set of colors it naturally looks nice with, both yielding different visual effects: the accompanying colors can either be Analogous or Complementary.

For the sake of example, let's say I am making a quilt and I have chosen a focus fabric that is predominantly violet:
Analogous - Analogous colors are the colors that are immediately next to each other on the Color Wheel, and are made up of one primary, one secondary and one tertiary. Sonce my focus fabric is purple, my analogous color set could either be red, red-violet and violet or blue, purple (aka blue-violet) and violet. Analogous colors in quilts create a softer, calmer more blended appearance (even if your focus is yellow)since they are all in the same color family.  

Complementary - Complementary colors are the colors that are opposite each other on the Color Wheel. Looking at the above Color Wheel, you can see that Violet's complement is yellow. When you're dealing with hues, complementary colors are a pairing of one primary and one secondary, or a pairing of two tertiaries, depending on your color choice. In quilts, it is the Complementary pairings that give your quilt pop! The opposite colors make each other brighter and more intense, which gives your quilt a brighter and more dynamic quilt. Complementary colors can be expanded into analogous complemntary pairings in quilts, meaning you pair your focus analogous set (let's say red, red-violet and violet ) with their complementary analogous set (yellow, yellow-green and green). Using Complementary Analgous pairs gives you a wider range of color, while toning down the intensity of your complements, still gives your quilt what I call "the pop factor." If you mix two complemenatry colors together, however, you will get a muddy shade of grey-brown. This is useful if you need a brown that plays well with your complements.


Now we're going to get a little more complicated, because we'll combine the above principles with some new mixes of color. Expand your idea of the Color Wheel from that of the simple Hue Color Wheel you learned in grade school into what I call "The Paint Chip Color Wheel" that you'd learn in art school. This is where we bring in the lights, darks, brights and neutrals together into one Color Wheel, as illustrated below. Since we just went through Hues, we're going to skip those and dive right in:
 


The Truth About Black and White
True or False: Black is all colors combined and white is the absence of color, so therefore there is only one black and one white - they're all the same.
Answer: FALSE. While it is true that black is all colors combined and white is the absence of color, it is not true that all balcks and all whites are same. Both colors are actually multi-tonal.

Have you ever put on a black shirt and a black pair of pants, walked outside and had someone point out your shirt and pants didn't match? Though tactless, it was probably true. When it comes to fabrics, not every black is the same. Different companies used different types of dye with different base colors to make their black dye.  Go into any quilt store and grab a few different brands of solid black; I guarantee you one will look warmer (red base) and one will look cooler (blue base) and one will look slightly greenish (green base). They're all black, but they have different bases. Dabbing some bleach on a piece of black fabric will show you what it's base color is if you have enough fabric to spare to test. Not only that, but because of their different bases, blacks come in a variety of shades evenwithout the addition of white: blue based blacks tend to be the darkest, and green based blacks tend to be lighter.

White functions a little differently. Think of it in terms of a white paint chip - there's bright white, soft white, eggshell white. They are all white and like black, unless you put 2 different whites together, its hard to tell the difference. In fabric, there is even something called "optic white," which is the white that is the brightest of them all. The softer whites work well in pastel quilts and in lanscape quilts where white is necessary. While still creating high contrast with other colors, it's not as stark as an optic white. Optic whites work nicely in more contemporary quilts and in quilts using brights. It creates the crispest line and the highest contrast. Natural light aids in determining what kind of white you have, since artificial (incandescent, fluorescent, LED etc) light can give fabric a slight cast of color it may or may not have on its own.


Tints
As you can see above, a Tint is the hue mixed with white. This is what we commonly refer to as the Pastel colors. The more white a hue is mixed with, the lighter and brighter the color becomes. This is also how we get our lightest of neutrals - cream, buff, beige - but I'll get to how we achieve our neutrals in a  moment. Tints may also be mixed with other tints to creat new tints. Whew! 

tints
Hue on the left, gradual tinting to the right. Courtesy of Tiger Color.

The same Warm/Cool, Analogous/Complementary (WC/AC Rules henceforth) apply to Tints as to Hues. Used alone, Tints provide quilts with a very soft, light, gentle, feminine look and feel, regardless of texture. These are perfect colors for baby, spring, winter, shabby chic, and girly girl quilts. When accompanying other non-Tint colors, they traditionally are used as backgrounds or to give the impression of light.

Examples of quilts using Tints. Tints don't have to be baby pastel, it just depends on how much white is present in the hue that determines how pastel it reads. Picture courtesy of Lori Smith of From My Heart to Your Hands

Tones


Tones are hues mixed with gray. Gray is not a tone; keep in mind that gray is white + black, which makes it technically a tint, and black is multi-colored. That means that since there are just about endless colors of gray (sounds odd, colors of gray, doesn't it?) because of the different blacks the white could get mixed with, Tones actually have a deceptively broad range of color. Depending on who you talk to, this is where you'll find your Neutrals. I disagree there, since not all (in fact, to my eye, not most) Neutrals are mixes of gray - they are more complex than that.

 Tones
Tones - Hue to the left, tone to the right. Courtesy of Tiger Color

Again, the same Warm/Cool, Analogous/Complementary (WC/AC Rules henceforth) apply to Tones as well. Tones make for great additions to masculine quilts, and are extremely useful in creating shadow and depth for landscape quilts. They also offset bright colors very well, and give those colors a "glowing" effect. Tones are also prevalent in Primitives and reproduction style quilts.

This is an example of a tonal/neutral quilt. The focus is gray, taupe and brown, with taupe being the prime example of a Tonal color (brown + gray). Photo courtesy of Quilts in Montana.

 
Shades
"Shade" is a word we use colloquially to denote the different colors within a color (shades of pink, shades of blue etc) that aren't necessarily dark, light or mid-tone. However, in Color Theory, a shade is a color that is mixed with black, making it the dark version of that color. Just like with Tones, because black is multi-colored, the effect can be whide ranging, from intensifying it to a dark, rich color (for example, mixing red with a red-based black), or to counteract the warmness/coolness of it (for example, mixing a red with a green based black). Shades can range from just slightly darker than mid-tone, to almost black, depending on how much black is mixed with the original color, but generally they are referred to as "dark [color of choice]."

Shades
Shades - Hue to the left, shaded to the right. Courtesy of Tiger Color

Shades are great for pairing with brighter colors to make them pop, or pairing with other shades to create a sense of depth and richness. They work very well in masculine quilts and contemporary quilts, and are prevalent in reproductions and Primitives.

This is a good example of shades and tonals. The lighter pieces are a tonal (taupe-gray) and the rest are shades of red, blue, rust and looks like green too. The quilt is beautifully rich. Picture courtesy of Heather Pearson's Blog.

Making Color Work FOR You
Choosing color for your quilt is not a scary as it can be made out to be. Thankfully, unlike paint, if you don't like a color you put in, or if it just doesn't work, you can take the piece out and put a new one in relatively easily. But a good rule of thumb is to start with a focus fabric that will be prevalent in your quilt, from which you can choose accompnying colors. Sometimes it's obvious which colors you want to put with your piece, and it's a snap and you get your colors picked in 5 minutes or less. They work great, and Voila! Successful quilt. This is more for when you have a focus fabric, or a set of colors you think you awant but are stumped as to what to put with it.

First, there are a couple things to consider. What kind of fibers will you be working with - cotton, batiks, flannel, wool, silk, wovens, etc? This is important to consider since some fibers absorb dye differently. Batiks and cottons tend to be more saturated with dye, and so they run the gamut from pastel to bright to dark with ease. Flannels can be bright, but more often than not you'll find darker, more muted colors or very soft pastel colors. Wool comes in all colors, but darker and brighter colors are more prevalent. Wovens tend to be more neutral and tonal.
Another question to ask yourself is, what do you want to achieve with your quilt? That will help determine your color selection. If you are looking to make a comfort quilt, you might shy away from the brighter, more intense colors and opt for something softer and more soothing. If you are looking to do something more contemporary, you might look more into the brights and tonals. If reproduction is your thing, you might seek out deeper and more tonal fabrics. Pastels are more suited for shabby chic, spring and baby quilts, so you might consider pastels for something like that. THERE IS NO HARD AND FAST RULE AS TO WHAT IS THE "RIGHT" COLOR FOR THE JOB. I cannot emphsize that enough! There are no Quilt Police that will haul you away for doing a baby quilt in tonals, a reproduction in pastels or a traditional quilt in brights. Consider who you're making it for, and what they like and what purpose it will serve. Everyone has a different eye and likes different things so COLOR CHOICE IS SUBJECTIVE. It's no fun if theres stress and anxiety over what's the correct color for the jo, it's all about what flows and looks good to your eye and Color Theory helps you get there. I digress :)

Here's a breakdown of colors and the effects they acheive on their own. When you combine them in certain ways, they bounce off each other differently:
Red: An active color, red will pop out from darker, cooler colors. It has warm intensity and brings to mind things like fire, love.
Orange: Also an active color, it pops from darker, cooler colors as well. It is warm and bright and gives quilts a happy, sunny, energetic feel.
Yellow: An active and intense color that will pop against any other, even warm colors. It is warm, crispand vibrant. the eye cannot focus on yellow for very long, so placing pops of yellow in a quilt forces the eye to move around the piece. It also gives quilts a cheerful and sunny feel.
Green: This is generally a more passive color that retreats when placed with warmer colors, but if the hue/tint is bright enough, it can pop depending on what it is placed with. Green helps give quilts a fresh, clean and calm ambiance.
Blue: Unless it is a very bright blue paired with other cool colors, blue is a passive color that retreats in the background. It will give your quilt a tranquil feel no matter the shade, and in the tonals it grounds the piece. Blue can be vibrant and energetic, but overall it is a calming influence.
Purple: As with green, the intensity and brightness of purple can change whether it pops or retreats. Generally though, it retreats and gives the quilt a fresh, feminine, or rich and regal feel. 
Neutrals: I'm going ot go ahead an use this umbrella term for browns, grays, beiges, taupes, tans, creams and everything inbetween. Neutrals tend to recede because they are mostly paired with a more dominant color.  They give quilts a calm, earthy simple beauty.
White: White quickly dominates a quilt, but if used too much it has a tendency to overpower the colors it's paired with. Colors appear less bright with white with them, but also appear fresher and clearer than with black, as seen below:
split-complementary scheme
Black: As seen above, black makes other colors, including white, pop. Because of its darkness, it dominates a quilt. visually while still letting other fabrics be the stars.

Here are some color choice tips to consider...
* Depending on what you choose to use as a background, the color you use on top of it may look different because of how the two colors play together based on where they are located on the color wheel. For example:
The center block in each square is the same red, but look how different it can look based on what you pair with it? Courtesy of Color Matters

Again, the center block is the same purple, buyt even with analogous colors, the focus color can seemingly change based on your background. Courtesy of Color Matters
* Color is important, but value is even moreso. You can have all of the range of color in the world but still have a flat quilt if it's all the same tint/tone/shade. Quilts need light, medium and dark fabrics to create depth. that doesn't mean every quilt needs black and white, but in whatever colors you choose, having both ends of the spectrum as well as the mid tone helps create richness, depth and that "Pop Factor" that quilters love.

* Cooler, darker colors tend to recede when places with brighter, warmer colors. If you want a portion of your block to pop, consider using the brighter complement as the focus of that block.

* Monochromatic (using the hue, tints, tones and shades of one color only) quilts are nothing to sneeze at. While only using one color, the value is what makes the quilt so visually impactful.

* Proportion of color and value is what gives your quilt its life - The dominant color is both the color you use the most of, or what your eye is drawn to quickest. Your sub-dominant colors are the colors that take up less area than the dominant color, but play well with the dominant. The accent is the color that takes up the least space, but contrasts the most with the sub-dominant and dominant color(s). Divinding your color choices into those groups can help organize and guide the direction of your quilt. Without stating it outright, most quilt patterns do this for you on the required yardage page.

* This Palette Picker is a great help to illustrate how your colors will interact if you're having a hard time visualizing. It's come in handy for me more than once!

This article has been supplemented by this Color Theory website. If you want to learn even more, this is the best, most in-depth tutorial I have found yet